B. Nair and R. Shendur, “Harnessing Magnetostriction,” Marine Technology, pp. 11–14, Jul. 2013.
J. Hu, F. Xu, A. Q. Huang, and F. G. Yuan, “Optimal design of a vibration-based energy harvester using magnetostrictive material (MsM),” Smart Materials and Structures, vol. 20, no. 1, pp. 1–12, Dec. 2010.
D. Davino, A. Giustiniani, and C. Visone, “A two-port nonlinear model for magnetoelastic energy-harvesting devices,”, IEEE Trans. Ind. Elec., vol. 58, no 6, pp. 2556–2564, Jun. 2011.
A. Matsui, Y. Yamamoto, and M. Hanazawa, “Energy scavenging using giant magnetostriction material-Prototype development,” in proc. 37th Annual Conference on IEEE Industrial Electronics Society (IECON), 2011, pp. 873–877.
H. Zhang, “Power generation transducer from magnetostrictive materials,” Applied Physics Letters, vol. 98, no. 23., pp. 232505– 232505-3, 2011.
T. Ueno and S. Yamada, “Performance of energy harvester using iron–gallium alloy in free vibration,” IEEE Trans. Magnetics, vol. 47, no. 10, pp. 2407–2409, Oct. 2011.
Y. Zhu and J. W. Zu, “A magnetoelectric generator for energy harvesting from the vibration of magnetic levitation,” IEEE Trans. Magnetics, vol. 48, no. 11, pp. 3344–3347, Nov. 2012.
W.-J. Kim and A. Sadighi, “A novel low-power linear magnetostrictive actuator with local three-phase excitation,” IEEE/ASME Trans. Mechatronics, vol. 15, no. 2, pp. 299–307, Apr. 2010.
C. S. Kong, “A general maximum power transfer theorem,” IEEE Trans. Education, vol. 38, no. 3, pp. 296–298, Aug. 1995.
K. Billings, Switchmode Power Supply Handbook, 2nd ed. New York: McGraw-Hill, 1999, pp. 4.3–4.9.
D. Dong, “Modeling and control design of a bidirectional PWM converter for single-phase energy systems,” M.S. thesis, Dept. Electron. Eng., Virginia Tech, Blacksburg, VA, May, 2009.
Fei Liu, Alex Phipps, Stephen Horowitz, Khai Ngo, Louis Cattafesta, Toshikazu Nishida, and Mark Sheplak, “Acoustic Energy Harvesting Using an Electromechanical Helmholtz Resonator,” Journal of the Acoustical Society of America, volume 123, issue 4, April 2008, pp. 1983-1990.
J. Juna, B. Chou, J. Lin, A. Phipps, X. Shengwen, K. Ngo, D. Johnson, A. Kasyap, T. Nishida, H.T. Wang, B.S. Kang, F. Ren, L.C. Tien, P.W. Sadik, D.P. Norton, L.F. Voss, and S.J. Pearton, “A Hydrogen Leakage Detection System Using Self-Powered Wireless Hydrogen Sensor Nodes,” Solid-State Electronics, Volume 51, Issue 7, July 2007, pp. 1018-1022.
Shengwen Xu, Khai D. T. Ngo, Toshi Nishida, Gyo-Bum Chung, and Attma Sharma, “Low Frequency Pulsed Resonant Converter for Energy Harvesting,” IEEE Transactions on Power Electronics, vol. 22, no. 1, January 2007, pp. 63-68.
Selvi Kadirvel, Fei Liu, Steve Horowitz, Toshikazu Nishida, Khai Ngo, Louis Cattafesta, and Mark Sheplak, “A Self-Powered Wireless Active Acoustic Liner,” 2006 AIAA/CEAS Aeroacoustics conference.
T. Nishida, J. Lin, K. Ngo, F. Ren, D. Norton, S. Pearton, L. Cattafesta, M. Sheplak, J. Jun, A. Kasyap, D. Johnson, and A. Phipps, “Wireless Hydrogen Sensor Self-powered Using Ambient Vibration and Light,” accepted for publication in ASME International Mechanical Engineering Conference and Exposition, November 5-10, 2006, Chicago, Illinois.
A. Kasyap, A. Phipps, M. Sheplak, K. Ngo, T. Nishida, and L. Cattafesta, “Lumped Element Modeling of Piezoelectric Cantilever Beams for Vibrational Energy Reclamation,” accepted for publication in ASME International Mechanical Engineering Conference and Exposition, November 5-10, 2006, Chicago, Illinois.
S. Horowitz, F. Liu, K. Ngo, T. Nishida, L. Cattafesta, and M. Sheplak, “Energy Harvesting Based on Acoustic and Hydrodynamic Pressure Fluctuations,” accepted for publication in ASME International Mechanical Engineering Conference and Exposition, November 5-10, 2006, Chicago, Illinois.
J. Lin, J. Jun, A. Phipps, X. Shengwen, K. Ngo, D. Johnson, A. Kasyap, T. Nishida, H. T. Wang, B. S. Kang, F. Ren, L. C. Tien, P. W. Sadik, D. P. Norton, L. F. Voss, and S. J. Pearton, “Self-Powered Wireless Nano-Sensor for Hydrogen Leak Detection and Wireless Power Transmission,” Radio Science Symposium for A Sustainable Humanosphere, Kyoto, Japan, March 20-21, 2006.
Jun, B. Chou, J. Lin, A. Phipps, X. Shengwen, K. Ngo, D. Johnson, A. Kasyap, T. Nishida, H. T. Wang, B. S. Kang, F. Ren, L. C. Tien, P. W. Sadik, D. P. Norton, L. F. Voss, and S. J. Pearton, “Low-Power Detection of Hydrogen Leakage Using a Self-Powered Wireless Hydrogen Sensor Node, American Institute of Chemical Engineers Conference, April 23-27, 2006, Orlando, Florida.
Shengwen Xu, Khai D. T. Ngo, Toshi Nishida, Gyo-Bum Chung, and Attma, “Converter and Controller for Micro-Power Energy Harvesting,” Proceedings of IEEE Applied Power Electronics Conference, 2005, pp. 226-230.
Taylor, R, Liu, F., Horowitz, S., Khai Ngo, Nishida, T., Cattafesta, L., and Sheplak, M., “Technology Development for Electromechanical Acoustic Liners,” Active 04, September 2004.
Anurag Kasyap, Ji-Song Lim, David Johnson, Stephen Horowitz, Toshikazu Nishida, Khai Ngo, Mark Sheplak, and Louis Cattafesta, “Energy Reclamation from a Vibrating Piezoceramic Composite Beam,” Ninth International Congress on Sound and Vibration, May 2002.
Stephen Horowitz, Anurag Kasyap, David Johnson, Toshikazu Nishida, Khai Ngo, Mark Sheplak, and Louis Cattafesta, “Technology Development for Self-Powered Sensors,” AIAA 1st Flow Control Conference, AIAA paper 2002-2702, 2002.
Chen, B.; Haring, A.J.; Beach, J.A.; Li, M.; Doucette, G.S.; Morris, A.J.; Moore, R.B.; Priya, S. “Visible Light Induced Photocatalytic Activity of Fe3+/Ti3+ Co-Doped TiO2 Nanostructures,” RSC Adv. 2014, 4, 18033-18037.
Wu, T.; Wang, D.; Zhang, M.; Heflin, J.R.; Moore, R.B.; Long, T.E. “RAFT Synthesis of ABA Triblock Copolymers as Ionic Liquid-Containing Electro-Active Membranes,” ACS Appl. Mater. Interface 2012, 4, 6552-6559.
Hou, J.; Yang, M.; Ellis, M.W.; Moore, R.B. “Lithium Oxides Precipitation in Nonaqueous Li-Air Batteries,” Phys. Chem. Chem. Phys. 2012, 14, 13487-13501.
Wu, T.; Beyer, F.L.; Brown, R.H.; Moore, R.B.; Long, T.L. “Influence of Zwitterions on Thermomechanical Properties and Morphology of Acrylic Copolymers: Implications for Electro-Active Applications,” Macromolecules 2011, 44, 8056-8063.
Hou, J.; Shao, Y.; Ellis, M.; Moore, R.B.; Yi, B. “Graphene-Based Electrochemical Energy Conversion and Storage: Fuel Cells, Supercapacitors and Lithium Ion Batteries,” Phys. Chem., Chem. Phys. 2011, 13, 15384-15402.
Li, J.; Park, J.K.; Moore, R.B.; Madsen, L.A. “Linear Coupling of Alignment with Transport in a Polymer Electrolyte Membrane,” Nature Materials 2011, 10, 507-511.
Park, J.K.; Jones, P.J.; Sahagun, C.; Page, K.A.; Hussey, D.S.; Jacobson, D.L.; Morgan, S.E.; Moore, R.B. “Electrically-Stimulated Gradients in Water and Counterion Concentrations within Electroactive Polymer Actuators,” Soft Matter 2010, 6, 1444-1452.
Park, J.K.; Moore, R.B. “Influence of Ordered Morphology on the Anisotropic Actuation in Uniaxially-Oriented Electroactive Polymer Systems,” ACS Applied Materials and Interfaces, 2009, 1(3), 697-702.
Phillips, A.K.; Moore, R.B. “Ionic Actuators Based on Novel Sulfonated Ethylene Vinyl Alcohol Copolymer Membranes,” Polymer 2005, 46, 7788.
“Large-scale Vibration Energy Harvesting” L. Zuo and X. Tang, Journal of Intelligent Material Systems and Structures, Vol 24 no 11, 2013
“A Self-Powered Piezoelectric Vibration Control System with Switch Pre-Charged In-ductor (SPCI) Method”, W. Zhou and L. Zuo, IEEE/ASME Transactions on Mechatronics, 2014
“Thermoelectric Properties of Magnesium Silicide Deposited using Atmospheric Plasma Thermal Spray”, G. Fu, L. Zuo, J. Longtin, C. Nie, Y. Chen, M. Tewolde and S. Sampath, Journal of Electronic Materials, 2014
“Analytical solutions to H2 and H∞ optimization of resonant shunted electromagnetic tuned mass damper and vibration energy harvester”, X. Tang, Y. Liu and L. Zuo, accepted by Journal of Vibration and Acoustics
“Energy-Harvesting Shock Absorber with a Mechanical Motion Rectifier”, Z. Li, L. Zuo, J. Kuang, and G.Luhrs, Smart Materials and Structures, Vol 22, n2, 2013 (Best paper award)
“Dynamics and control of ocean wave energy converters”, J. Xie and L. Zuo, International Journal of Dynamics and Control, vol 1 n3, 2013
“Energy Harvesting, Ride Comfort, and Road Handling of Regenerative Vehicle Suspensions”, L. Zuo and P. Zhang, ASME Journal of Vibration and Acoustics, v135, 2013.
“Electromagnetic Energy-Harvesting Shock Absorbers: Design, Modeling and Road Tests”, Z. Li, L. Zuo, et al., IEEE Transactions on Vehicular Technology, vol62, 2013
“Dual-Functional Energy Harvesting and Vibration Control: Electromagnetic Resonant Shunt Series Tuned Mass Damper”, L. Zuo and W. Cui, ASME J. of Vibration and Acoustics, 2013
“Design and Optimization of Tubular Linear Electromagnetic Vibration Energy Harvesters”, X. Tang. T. Lin, and L. Zuo, IEEE/ASME Transactions on Mechatronics, 2013
“Fabrication of Thermoelectric Devices Using Thermal Spray: Application to Vehicle Exhaust Systems to Improve Fuel Economy”, J. Longtin, L. Zuo, et al., Journal of Thermal Spray Technology, 2013.
“Energy Harvesting Using a PZT Ceramic Multilayer Stack”, T. Xu, E. Siochi, J Kang, L. Zuo, W. Zhou, X. Tang, and X. Jiang, Smart Materials and Structures, 2013
“Assessment of Vehicle Performances with Energy-Harvesting Shock Absorbers”, P. Li and L. Zuo, SAE International Journal of Passenger Cars- Mechanical Systems, vol 6, n1, 2013.
“Thermoelectric Properties of Magnesium Silicide Fabricated using Vacuum Plasma Thermal Spray”, G. Fu, L. Zuo, J. Longtin, C. Nie, R. Gambino, Journal of Applied Physics,v114, 2013
“Simultaneous Energy Harvesting and Vibration Control of Structures with Tuned Mass Damper”, X. Tang and L. Zuo, J. of Intelligent Material Systems and Structures, vol 23, 2012
“On the Vibration Energy Harvesters under Random Excitations of External Force and Base Motions”, X. Tang and L. Zuo, Smart Materials and Structures, Vol 21, 2012
“An Efficient Vibration Energy Harvester with Multi-Mode Dynamic Magnifier”, W. Zhou, G.R. Penamalli and L. Zuo, Smart Materials and Structures, Vol 21, 2012 (top 10% downloaded article in all the journals of the publisher)
“A New Type of Eddy Current Damper with Increased Energy Density,” L Zuo, X. Chen, S. Nayfeh, ASME Journal of Vibration and Acoustics, vol 133, Aug2011 (The most downloaded article of the journal in April 2011.)
“Enhanced Vibration Energy Harvesting using Dual-Mass Systems”, X. Tang and L. Zuo, Journal of Sound and Vibration, Vol 330, pp5199–5209, 2011. (Top 10 most downloaded articles of the journal in Dec 2011)
“Design and Characterization of an Electromagnetic Energy Harvester for Vehicle Suspensions,” L. Zuo, B. Scully, J. Shestani, and Y. Zhou, Smart Materials and Structures, Vol 19 n4, 2010. (Highlighted as a feature story at the PhysOrg on March 17th 2010; Selected to be part of Smart Materials and Structures Annual Journal Highlights of 2010, cited 74 times in Google Scholar)